- Track your orders
- Save your details for express checkout
MAXIEM 1515 JetMachining Centre
OM1515
MAXIEM Waterjet Range
06 322 1575
Specifications
| Standard Layout Footprint* (L x W): | 4,040 mm x 3,780 mm |
| Height **: | 2,950 mm |
| Weight (Tank Empty): | 2,722 kg |
| Operating Weight: | 6,402 kg |
| X-Y Cutting Envelope***: | 1,570 mm x 1,570 mm |
| Z-Axis Travel***: | 304 mm |
| Table Size (L x W): | 2,240 mm x 1,730 mm |
| Material Support Slats: | 102mm x 2 mm Galvanised Steel |
| Max Supported Material Load: | 1465kg/m2 |
| Electrical Requirements: | 3 Phase 380-480 VAC +/- 10% 50-60 Hz |
| Noise Level: | Below 80 dB at one metre for submerged cutting |
| Speed: | 12,700 mm/min |
| Linear Positional Accuracy: | ±0.076 mm |
| Repeatability: | ±0.025 mm |
| Ballbar Circularity: | ±0.127 mm |
Description
Faster, smoother, and more precise, the MAXIEM 1515 is ideal for a wide range of modern machining needs.
The MAXIEM 1515 delivers high performance in a compact package. With an ample cutting area that easily fits material stock, the 1515 is an excellent fit for fabrication and job shops. With optional accessories such as the A-Jet for 5-Axis cutting and taper compensation, Rapid Water Level Control for submerged cutting, and Collision Sensing Terrain Follower for machining irregular surfaces expand your JetMachining capabilities and dramatically improve production. Paired with the highly efficient MAXIEM Direct Drive Pump giving it the highest nozzle horsepower in the industry for faster, more efficient cutting. Waterjet system includes a MAXIEM pump and software.
OMAX Benefits
- Fastest cutting speeds and best precision compared to any competitive abrasive waterjet in the industry.
- Backed by our exclusive IntelliMAX Software with real world cutting data.
- Small, efficient footprint for minimal floor space utilisation.
- The mobile control station allows operators direct and efficient access to the cutting process with storage for all of the tools and spares.
- Powerful all-in-one controller computer with large screen.
- Drive system sealed against water, dirt, and grit.
- No tool changes & minimal fixturing dramatically reduce setup.
- Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics.
- Leaves behind a satin-smooth edge, reducing secondary operations.
- Does not create heat-affected zones or mechanical stresses.
- No noxious gases, liquid or oils used in, or caused by, the machining process.
- Environmentally "green" system with quiet and clean operation with low electrical consumption.
- Shipped as a completely pre-assembled and factory-tested system.
- Designed and manufactured at the OMAX factory in Kent, Washington, USA.
- Standard patent-pending IntelliTRAX traction drive inside the X-Y Axis beams fully enclosed inside coated steel covers.
- Standard IntelliVISOR SE System Monitoring offers predictive maintenance and system monitoring to minimise unexpected downtime.
- Standard programmable Motorised Z-Axis with a precision OMAX MAXJET 5i Nozzle boosts productivity and process efficiency.
- Optional scissor-style hard plumbing adds another level of safety by using contained high-pressure components, as well as contributes to a smaller footprint, lower maintenance, and higher reliability.
- Optional Rapid Water Level Control for cleaner, safer, and quieter submerged cutting completes most work below 80 dB.
- Optional Bulk Abrasive Delivery System transports garnet from the assembly's large hopper into the Zero Downtime Hopper located on the Z-Axis.
- Optional Variable Speed Solids Removal System (VS-SRS) designed for industrial use increases uptime through automated solids removal.
- Optional IntelliCAM software program is available with two tools in one that can generate either 2D or 3D tool paths from 3D models.
- Highly efficient, industry-proven direct drive pumps available up to 40 HP with operating efficiencies up to 85%.
- Uses substantially less cooling water than inefficient hydraulic intensifier pumps.
- Lowest electrical consumption compared to other pump technology.
Additional Notes
- All products meet rigorous international standards and requirements.
- Accuracy Specifications are based on a water temperature of 22℃.
- OMAX reserves the right to adjust specifications without notice.
- Install according to local electrical code.
**With standard whip plumbing.
*** Additional accessories may reduce travel.
**** Recommended maximum orifice size. Smaller orifice sizes have a corresponding lower flow rate.
Additional Options
- A-Jet 5-Axis Cutting Head with Smart Taper Control
- Rapid Water Level Control for submerged cutting
- IntelliVISOR EX Monitoring Expansion Package
- OMAX Mini MAXJET 5i Nozzle
- 7/15 Mini MAXJET5 Nozzle
- Bulk Abrasive Deliver System
- A-Jet Terrain Follower
- Collision Sensing Terrain Follower
- Manual Tilt Z-Axis
- Material Holding Kit
- Waterjet Brick Kit
- High Pressure Universal Scissor Plumbing
- Bridge-mounted Pause Button and USB Port
- Variable Speed Solids Removal System (VS-SRS)
- Water-only MAXJET5 Nozzle
- Laser Feature Finder
- Z-Axis Pneumatic Drill
- Splash Shield Kit
- Water Resistant Keyboard and Mouse
- Access Control Circuit Interface for Safety Interlocks
- Extended Slat Package
- Air and Water Conditioning Kit
.jpg)
.jpg)
