- Track your orders
- Save your details for express checkout
OMAX 120X SERIES Precision JetMachining Centre
O120X
OMAX Waterjet Range
06 322 1575
Specifications
| Machine Footprint* (L x W): | 8,100 mm x 5,920 mm to 15,700 mm x 6,830 mm |
| Height **: | 4,267 mm |
| Weight (Tank Empty): | 5,443 kg |
| Operating Weight: | 22,060 kg |
| X-Y Cutting Envelope***: | 6,096 mm x 3,048 mm |
| Z-Axis Travel***: | 203 mm |
| Table Size (L x W): | 4,547 mm x 3,480 mm |
| Material Support Slats: | 102mm x 3mm Galvanised Steel |
| Max Supported Material Load: | 1950kg/m2 |
| Electrical Requirements: | 3 Phase 380-480 VAC +/- 10% 50-60 Hz |
| Noise Level: | Below 80 dB at one metre for submerged cutting |
| Speed: | 8,890 mm/min |
| Linear Positional Accuracy: | ±0.025 mm |
| Repeatability: | ±0.025 mm |
| Ballbar Circularity: | ±0.127 mm |
Description
The OMAX 120X Series are one of the largest OMAX bridge-style machines.
Available in a variety of machine lengths, each model features the advanced patented IntelliTRAX linear drive technology designed exclusively for the abrasive waterjet environment. This robust and reliable system maximises production and profitability. The large cutting area of the 120X makes it ideal for multiple part projects or large-scale part production. Waterjet system includes a EnduroMAX pump and software.
Drive Description
Brushless servo motors, Closed loop digital drives, IntelliTRAX drive technology with precision linear encoders on X-Axis, Precise Motorised Z-Axis.
- All products meet rigorous international standards and requirements.
- Accuracy Specifications are based on a water temperature of 22°C.
- OMAX reserves the right to adjust specifications without notice.
- Install according to local electrical code.
* Footprint does not include controller or pump.
**With standard scissor plumbing.
*** Additional accessories may reduce travel.
**** Recommended maximum orifice size. Smaller orifice sizes have a corresponding lower flow rate.
OMAX Benefits
- Fastest cutting speeds and best precision compared to any competitive abrasive waterjet in the industry.
- Backed by our exclusive IntelliMAX Premium Software with real world cutting data.
- Robust and accurate design for tight tolerance cutting and reliable operation.
- Small, efficient footprint for minimal floorspace utilisation.
- Easy operator access to the work area.
- Precision X-Y Axis rigidly mounted to the cutting table.
- Pre-loaded linear bearings and precision ball screws.
- Drive system sealed against water, dirt, and grit.
- No tool changes & minimal fixturing dramatically reduce setup.
- Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics.
- Leaves behind a satin-smooth edge, reducing secondary operations.
- Does not create heat-affected zones or mechanical stresses.
- Environmentally "green" system uses only natural garnet abrasive and water in the cutting process.
- No noxious gases, liquid or oils used in, or caused by, the machining process.
- Shipped as a completely pre-assembled and factory-tested system.
- Designed and manufactured at the OMAX factory in Kent, Washington, USA.
- Standard programmable Motorised Z-Axis with a precision OMAX MAXJET 5i Nozzle boosts productivity and process efficiency.
- Standard IntelliCAM software program is available with two tools in one that can generate either 2D or 3D tool paths from 3D models.
- Standard IntelliVISOR SE System Monitoring offers predictive maintenance and system monitoring to minimise unexpected downtime.
- Standard patent-pending IntelliTRAX traction drive inside the X-Axis beams fully enclosed inside coated steel covers.
- Standard scissor-style hard plumbing adds another level of safety by using contained high-pressure components, as well as contributes to a smaller footprint, lower maintenance, and higher reliability.
- Standard Rapid Water Level Control for cleaner, safer, and quieter submerged cutting completes most work below 80 dB.
- Standard 600 lb Bulk Abrasive Delivery System transports garnet from the assembly's large hopper into the Zero Downtime Hopper located on the Z-Axis.
- Optional DualBRIDGE System can be used to increase machining capability.
- Optional Tilt-A-Jet taper eliminating abrasive jet cutting head.
- Optional Variable Speed Solids Removal System (VS-SRS) designed for industrial use increases uptime through automated solids removal.
- High efficiency EnduroMAX pump system available in 30 HP, 40 HP or 50 HP with operating efficiencies up to 85%.
- EnduroMAX pump technology delivers the highest nozzle horsepower in the industry for faster and more efficient cutting.
- Highly robust and reliable pump design capable of up to 1,000 hours between maintenance.
Additional Options
- Tilt-A-Jet Cutting Head
- Variable Speed SRS (VS-SRS)
- Collision Sensing Terrain Follower (with Tilt-A-Jet only)
- Z-Axis Drill
- Precision Optical Locator (POL)
- Rotary Axis
- Laser Finder Feature
- Water-only MAXJET 5 for cutting soft materials
- OMAX Mini MAXJET 5i Nozzle Assembly
- Manual Tilt Z
- Waterjet Brick Kit
- Material Holding Kit
- DualBRIDGE second Bridge
- Second MAXJET 5i with Motorised Z-Axis (requires second Y-Axis) carriage
- Air & Water Conditioning Kit
- A-Jet
- Terrain Follower A-Jet
- Large Solids Removal System
- A 2 Meter Long Tank Reduction making a 120X/S
- An addition of a 2 Metre Long Tank Extension making a 120X-1 or 4 Metre Long Tank Extension making a 120X-2.
.jpg)
.jpg)
.jpg)