- Track your orders
- Save your details for express checkout
OptiMAX 60X Precision JetMachining Centre
OPTI60X
OptiMAX Waterjet Range
06 322 1575
Specifications
| Standard Layout Footprint* (L x W): | 6,910 mm x 3,630 mm |
| Height **: | 2,970 mm |
| Weight (Tank Empty): | 3,855 kg |
| Operating Weight: | 16,383 kg |
| X-Y Cutting Envelope***: | 3,040 mm x 1,570 mm |
| Z-Axis Travel***: | 304 mm |
| Table Size (L x W): | 3,810 mm x 1,880 mm |
| Material Support Slats: | 4" x 1/8" Galvanized Steel |
| Max Supported Material Load: | 1950kg/m2 |
| Electrical Requirements: | 3-Phase, 380-480 VAC +/- 10% 50-60 Hz |
| Noise Level: | Below 80 dB at one metre for submerged cutting |
| Speed: | 8,890 mm/min |
| Linear Positional Accuracy: | ±0.025 mm |
| Repeatability: | ±0.025 mm |
| Ballbar Circularity: | ±0.076 mm |
Description
The OMAX OptiMAX 60X is the culmination of three decades of engineering expertise and experience, using abrasive waterjet operators feedback at the forefront of design, resulting in the worlds most accurate waterjet designed for maximum uptime in any manufacturing environment.
The OptiMAX 60X system features IntelliTRAX linear drive system, the high precision, traction drive technology designed exclusively for the abrasive waterjet environment, on both the X and Y axis rails capable of 1-micron resolution for high accuracy and performance.
OMAX IntelliMAX Premium software designed for abrasive waterjet machining, operating on Windows 10, with wide screen display and mobile workstation, incorporating a durable work surface and consumable storage enables positioning of the controller to optimise cutting process viewing.
Breakthrough OMAX pump technology delivers more jet power (nozzle HP) to the nozzle than other types of waterjet pumps at very low noise levels (<80 dB). This technology paired with fully integrated/automated pump control, reduces dependency on operators. The pinnacle in high performance abrasive waterjet machining, OptiMAX systems are compatible with the Programmable Z, Tilt-A-Jet or VersaJet cutting heads, as well as a full host of accessories.
Drive Description
Exclusive IntelliTRAX abrasive jet linear drive system provides 350 in/min (8.9 m/min) traverse with real-time closed-loop positioning feedback.
Additional Notes
- All products meet rigorous international standards and requirements.
- Accuracy Specifications are based on a water temperature of 22℃.
- OMAX reserves the right to adjust specifications without notice.
- Install according to local electrical code.
**With standard scissor plumbing.
*** Additional accessories may reduce travel.
**** Recommended maximum orifice size. Smaller orifice sizes have a corresponding lower flow rate.
OMAX Benefits
- Fastest cutting speeds and best precision compared to any competitive abrasive waterjet in the industry.
- Backed by our exclusive IntelliMAX Premium Software with real world cutting data.
- Robust and accurate design for tight tolerance cutting and reliable operation.
- Small, efficient footprint for minimal floorspace utilisation.
- Precision X-Y Axis rigidly mounted to the cutting table.
- Drive system sealed against water, dirt, and grit.
- No tool changes & minimal fixturing dramatically reduce setup.
- Leaves behind a satin-smooth edge, reducing secondary operations.
- Environmentally "green" system uses only natural garnet abrasive and water in the cutting process.
- No noxious gases, liquid or oils used in, or caused by, the machining process.
- Designed and manufactured at the OMAX factory in Kent, Washington, USA.
- Standard programmable Motorised Z-Axis with a precision OMAX MAXJET 5i Nozzle boosts productivity and process efficiency.
- Standard IntelliCAM software program is available with two tools in one that can generate either 2D or 3D tool paths from 3D models.
- Standard IntelliVISOR SE System Monitoring offers predictive maintenance and system monitoring to minimise unexpected downtime.
- Standard patent-pending IntelliTRAX traction drive inside the X-Axis beams fully enclosed inside coated steel covers.
- Standard scissor-style hard plumbing adds another level of safety by using contained high-pressure components, as well as contributes to a smaller footprint, lower maintenance, and higher reliability.
- Standard Rapid Water Level Control for cleaner, safer, and quieter submerged cutting completes most work below 80 dB.
- Standard 600 lb Bulk Abrasive Delivery System transports garnet from the assembly's large hopper into the Zero Downtime Hopper located on the Z-Axis.
- Optional DualBRIDGE System can be used to increase machining capability.
- Optional Tilt-A-Jet taper and VersaJet multi-axis cutting heads.
- Optional Variable Speed Solids Removal System (VS-SRS) designed for industrial use increases uptime through automated solids removal.
- High efficiency EnduroMAX pump system available in 30 HP, 40 HP or 50 HP with operating efficiencies up to 85%.
- EnduroMAX pump technology delivers the highest nozzle horsepower in the industry for faster and more efficient cutting.
- Highly robust and reliable pump design capable of up to 1,000 hours between maintenance.
Additional Options
- Collision Sensing Terrain Follower
- Laser Feature Finder
- Automated Air Sweep
- Precision Optical Locator
- Vacuum Assist
- Bulk Abrasive Delivery System
- Variable Speed Solid Removal System
- Machine Status Indicator
- Under Bridge Lighting
- Tilt-A-Jet
- VersaJet
.jpg)
.jpg)
.jpg)