- Track your orders
- Save your details for express checkout
OMAX 2626 Precision JetMachining Centre
O2626
OMAX Waterjet Range
06 322 1575
Specifications
| Machine Footprint* (L x W): | 2,970 mm x 2,080 mm |
| Height **: | 2,540 mm |
| Weight (Tank Empty): | 1,361 kg |
| Operating Weight: | 2,962 kg |
| X-Y Cutting Envelope***: | 660 mm x 660 mm |
| Z-Axis Travel***: | 203 mm |
| Table Size (L x W): | 1,168 mm x 787 mm |
| Material Support Slats: | 102mm x 3mm Galvanised Steel |
| Max Supported Material Load: | 1950kg/m2 |
| Electrical Requirements: | 3 Phase 380-480 VAC +/- 10% 50-60 Hz |
| Noise Level: | Below 80 dB at one metre for submerged cutting |
| Speed: | 4,572 mm/min |
| Linear Positional Accuracy: | ±0.025 mm |
| Repeatability: | ±0.025 mm |
| Ballbar Circularity: | ±0.064 mm |
Description
The OMAX 2626 JetMachining Centre has the smallest footprint of our cantilever-style waterjet machines making it ideal for high precision waterjet machining, from research and development to small part prototyping and production.
The 2626 utilises the fast, efficient, and powerful IntelliMAX Software Suite to achieve superior performance while cutting complex parts out of most materials. With the optional Tilt-A-Jet and 7/15 Mini MAXJET nozzle, the 2626 is capable of precision miniature machining. Waterjet system includes a EnduroMAX pump and software.
Drive Description
Closed loop digital drives, brushless servo motors, pre-loaded ball screws with recirculating ball bearings, linear bearings with hardened precision ground ways, Cantilever Y-Axis on bridge and X-Axis.
Additional Notes
- All products meet rigorous international standards and requirements.
- Accuracy Specifications are based on a water temperature of 22℃.
- OMAX reserves the right to adjust specifications without notice.
- Install according to local electrical code.
**With standard scissor plumbing.
*** Additional accessories may reduce travel.
**** Recommended maximum orifice size. Smaller orifice sizes have a corresponding lower flow rate.
OMAX Benefits
- Fastest cutting speeds and best precision compared to any competitive abrasive waterjet in the industry.
- Backed by our exclusive IntelliMAX Premium Software with real world cutting data.
- Robust and accurate design for tight tolerance cutting and reliable operation.
- Easy operator access to the work area.
- Small, efficient footprint for minimal floor space utilisation.
- Precision X-Y Axis rigidly mounted to the cutting table.
- Pre-loaded linear bearings and precision ball screws.
- Drive system sealed against water, dirt, and grit.
- No tool changes & minimal fixturing dramatically reduce setup.
- Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics.
- Leaves behind a satin-smooth edge, reducing secondary operations.
- Does not create heat-affected zones or mechanical stresses.
- Environmentally "green" system with quiet and clean operation with low electrical consumption.
- No noxious gases, liquid or oils used in, or caused by, the machining process.
- Shipped as a completely pre-assembled and factory-tested system.
- Designed and manufactured at the OMAX factory in Kent, Washington, USA.
- Standard programmable Motorised Z-Axis with a precision OMAX MAXJET 5i Nozzle boosts productivity and process efficiency.
- Standard IntelliCAM software program is available with two tools in one that can generate either 2D or 3D tool paths from 3D models.
- Standard IntelliVISOR SE System Monitoring offers predictive maintenance and system monitoring to minimise unexpected downtime
- Standard Rapid Water Level Control for cleaner, safer, and quieter submerged cutting completes most work below 80dB.
- Optional Bulk Abrasive Delivery System transports garnet from the assembly's large hopper into the Zero Downtime Hopper located on the Z-Axis.
- Standard whip-style hard plumbing adds another level of safety by using contained high-pressure components, as well as contributes to a smaller footprint, lower maintenance, and higher reliability.
- Optional Tilt-A-Jet taper eliminating abrasivejet cutting head.
- Optional Variable Speed Solids Removal System (VS-SRS) designed for industrial use increases uptime through automated solids removal.
- EnduroMAX pump technology delivers the highest nozzle horsepower in the industry for faster and more efficient cutting.
- High efficiency EnduroMAX pump system available in 30 HP, 40 HP or 50 HP with operating efficiencies up to 85%.
- Highly robust and reliable pump design capable of up to 1,000 hours between maintenance.
- Uses substantially less cooling water than inefficient hydraulic intensifier pumps.
- Lowest electrical consumption compared to other pump technology
Additional Options
- Tilt-A-Jet Cutting Head for Taper Compensation
- Variable Speed Solids Removal System (VS-SRS)
- Collision Sensing Terrain Follower (with Tilt-A-Jet only)
- OMAX Drill Head
- Precision Optical Locator (POL)
- Rotary Axis
- Laser Finder Feature
- Water-only MAXJET 5 for cutting soft materials
- OMAX Mini MAXJET 5i Nozzle Assembly
- Manual Tilt Z
- Waterjet Brick Kit
- Material Holding Kit
- Bulk Abrasive Delivery System
.jpg)
.jpg)
.jpg)
.jpg)